INCOLOY ASTM B409 UNS N08811 SHEETS, INCOLOY UNS N08800 SHEETS, ALLOY 800 COLD-ROLLED PLATES IN THAILAND, INCOLOY UNS N08810 HOT ROLLED PLATES IN AUSTRALIA, INCOLOY 800H SHEETS IN USA, INCOLOY UNS N08800 SEAMLESS SLITTING COIL IN GERMANY
Unimix Metal Cooperation provides premium Incoloy 800 Perforated Coils, known for their high tensile strength, corrosion resistance, and ease of fabrication. These coils are widely used in screens, filters, diffusers, strainers, washer/dryer drums, and medical equipment.
We also offer Incoloy 800, 800H, and 800HT Plates, which are gaining attention in advanced reactor concepts due to their exceptional design strength at high temperatures, particularly between 1200°F – 1400°F (649°C – 760°C).
Grade | Incoloy 800, 800H, 800HT | UNS N08800, N08810, N08811 |
Standard | ASTM B409 / ASME SB409 |
Size | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
Thickness | 0.1mm To 30 mm |
Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Form | Sheets, Plates, Coils, Slatting Coils, Perforated Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard, etc. |
Applications | Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry |
Standard | Incoloy 800 | Incoloy 800H | Incoloy 800HT |
UNS | N08800 | N08810 | N08811 |
EN | X10NiCrAlTi32-20 | X5NiCrAlTi31-20 | X8NiCrAlTi32-21 |
AFNOR | Z8NC32-21 | Z8NC33-21 | – |
JIS | NCF 800 | NCF 800H | NCF 800HT |
BS | NA 15 | NA 15(H) | NA 15(HT) |
WERKSTOFF NR. | 1.4876 | 1.4958 / 1.4876 | 1.4859 / 1.4876 |
GOST | ЭИ670 | ЭИ670 | ЭИ670 |
OR | XH32T | XH32T | XH32T |
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
Incoloy 800 Sheets, Plates & Coils | ASTM B409 Alloy 800HT Sheets | Alloy 800H Plates |
Incoloy 800H Coils | Incoloy Alloy 800 Foils | Incoloy 800HT Shim Sheet |
Incoloy Alloy 800H Perforated Coils | Incoloy 800 Slatting Coils | Alloy 800HT Polished Plates |
UNS N08800 Incoloy Hot Rolled Plates | WNR 1.4876 Incoloy Cold Rolled Plates | UNS N08811 Strips |
Incoloy 800H Circle | Alloy UNS N08810 Plain Sheet | Alloy 800HT Flats |
Unimix Metal Corporate, under the leadership and mentoring of intellectual individuals, is currently one of the Manufacturer, Supplier, Stockiest, Importer and Exporter of Stainless Steel , Carbon Steel , Alloy Steel , High Nickel Alloys , Special Alloys , Aluminium Alloys , Copper Nickel , Titanium Alloys , Duplex & Super Duplex , Tantalum , Abrasion Resistant Steel, Hadfield Manganese Steel , Corten Steel , High Tensile , Quenched & Tempered Steel , Armour Steel , etc in Forms of Pipes , Tubes , Plates , Round Bars and Fittings.
Home
About
Products
Stainless Steel
Carbon Steel
Duplex Steel
Super Duplex Steel
Nickel Alloys Steel
Terms of Service
Privacy Policy
Disclosures
17, Ramkutir Building, 12th Khetwadi Cross Lane, Mumbai 400 004.
bhavik@unimixmetal.com | info@unimixmetal.com
+91-9321604957/+91-9920477004
+91-22-67438772 | +91-22-67438452
+91-22-23801838
www.unimixmetal.com
© 2022 UNIMIX METAL CORPORATION
