Unimix Metal Cooperation is a Manufacturer, Stockist, Exporter, and Supplier of Inconel Alloy 600 Round Bars, thoroughly tested by a team of experts to ensure safety and flawless performance. These Inconel 600 Round Bars are produced and tested according to relevant standards, including ASTM and ASME.
We also manufacture Inconel 600 Square Bars, known for their excellent tensile strength, high resistance to corrosion, and superior fabrication ability. Our Inconel 600 Round Bars are widely used in extreme environments, such as those involving high temperature and pressure.
Grade | Inconel Alloy 600 / UNS NO6600 |
Specification | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Standard | ASTM B166 / ASME SB166 |
Size | 5 mm To 500 mm |
Diameter | 0.1 mm to 100 mm |
Length | 100 mm To 3000 mm Long & Above |
Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Form | Round Bars, Square Bars, Flat Bars, Threaded Bars, Hollow Bars, Hexagonal Bars, Triangular Bars |
Application | Most commonly used in petroleum refineries, Boilers, Heat exchangers, Condensers, Pipelines, Cooling towers, Steam exhausts, Electric generation plants, On occasion will be found in fertilizer and chemical plants. |
Standard | Inconel 600 |
UNS | N06600 |
GOST | МНЖМц 28-2,5-1,5 |
BS | NA 13 |
JIS | NCF 600 |
AFNOR | NC15FE11M |
WERKSTOFF NR. | 2.4816 |
EN | NiCr15Fe |
OR | ЭИ868 |
Grade | C | Mn | Si | Cu | S | Fe | Mo | Ni | Cr |
Inconel 600 | 0.15 max | 1 max | 0.50 max | 0.50 max | 0.15 min | 6.0-10.0 | – | 72 min | 14.0–17.0 |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Inconel 600 Round Bars | Alloy 600 Flat Bars | Inconel N06600 Square Bars |
600 Inconel Triangular Bars | Inconel 600 Threaded Bars | Alloy 600 Round Bars |
Inconel 600 Bright Bars | Alloy 600 Hex Bars | Inconel 600 Flat Bars |
Alloy UNS N06600 Hexagonal Bars | Inconel UNS N06600 Round Rods | WNR. 2.4816 Rectangular Bars |
Alloy 600 Hollow Bars | Werkstoff Nr. 2.4816 Bars | UNS N06600 Polished Bars |
Unimix Metal Corporate, under the leadership and mentoring of intellectual individuals, is currently one of the Manufacturer, Supplier, Stockiest, Importer and Exporter of Stainless Steel , Carbon Steel , Alloy Steel , High Nickel Alloys , Special Alloys , Aluminium Alloys , Copper Nickel , Titanium Alloys , Duplex & Super Duplex , Tantalum , Abrasion Resistant Steel, Hadfield Manganese Steel , Corten Steel , High Tensile , Quenched & Tempered Steel , Armour Steel , etc in Forms of Pipes , Tubes , Plates , Round Bars and Fittings.
Home
About
Products
Stainless Steel
Carbon Steel
Duplex Steel
Super Duplex Steel
Nickel Alloys Steel
Terms of Service
Privacy Policy
Disclosures
17, Ramkutir Building, 12th Khetwadi Cross Lane, Mumbai 400 004.
bhavik@unimixmetal.com | info@unimixmetal.com
+91-9321604957/+91-9920477004
+91-22-67438772 | +91-22-67438452
+91-22-23801838
www.unimixmetal.com
© 2022 UNIMIX METAL CORPORATION
