MONEL ASTM B366 UNS N04400 FITTING CROSS, MONEL UNS N04400 SHORT RADIUS ELBOW, MONEL ALLOY DIN 2.4360 HEX PLUS IN TURKEY, MONEL ALLOY 400 ECCENTRIC REDUCER IN AUSTRALIA, MONEL ASTM B366 UNS N04400 PIPE BEND PIPE U IN USA, MONEL 400 THREADED BEND IN GERMANY
Unimix Metal Cooperation is a leading manufacturer, supplier, and exporter of a wide range of WNR 2.4360 Monel 400 Pipe Fittings. These fittings are made from Monel, a copper-nickel alloy known for its durability and malleability.
Monel 400® is a nickel-copper alloy often used in high-performance and critical applications. It offers excellent strength, resistance to acids and alkalis, good ductility, and impressive thermal conductivity. The Monel 400 Long Stub End is designed to handle extremely high pressure and comes with a product warranty.
Our ASME SB 366 Monel 400 Elbows are highly resistant to caustic solvents, acids, alkalines, and seawater, maintaining exceptional robustness even at high temperatures. Similarly, our UNS N04400 Cross Pipe Fittings (Monel 400) exhibit great strength and outstanding corrosion resistance across various environments, including seawater, hydrofluoric acid, sulfuric acid, and alkalis.
MONEL 400, ALLOY 400 PIPE FITTINGS SPECIFICATIONS
Grade | Monel 400 / UNS N04400 |
Standard | ASTM B366, ASME SB366 |
Dimensions | ASME B16.28, ASME/ANSI B16.9, MSS-SP-43 |
Monel 400 Seamless Fittings | 1/2″ NB – 10″ NB |
Monel 400 Welded Fittings | 1/2″ NB – 48″ NB |
Form | 90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap |
Schedule | SCH 5 To SCH XXS |
Wall Thickness | from 2 to 40 mm |
Type | Seamless / Welded / Fabricated |
Standard | Monel 400 |
Werkstoff Nr. | 2.4360 |
UNS | N04400 |
JIS | NW 4400 |
AFNOR | NU-30M |
BS | NA 13 |
GOST | МНЖМц 28-2,5-1,5 |
EN | NiCu30Fe |
Monel 400 | Ni | C | Al | Mn | Si | Fe | Cu | S | Co | Cr |
63.0 min | 0.3 max | 0.50 max | 2.0 max | 0.5 max | 1.0 – 2.5 | 28.0 – 34.0 | 0.02 max | – | – |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 35,000 , MPa – 240 | Psi – 80,000 , MPa – 550 | 40 % |
Monel 400 Pipe Fitting | Monel 400 Butt weld Fitting | Monel 400 Seamless Fitting |
Monel 400 Welded Fitting | Monel 400 90 Elbow | Monel 400 45 Elbow |
UNS N04400 Long Radius Elbow | WNR. 2.4360 Short Radius Elbow | Monel 400 Concentric Reducer |
Monel 400 Eccentric Reducer | Monel 400 Equal Tee | Monel 400 Unequal Tee |
Monel 400 Lateral Tee | UNS N04400 Fitting Cross | Monel 400 Pipe Bends |
Monel 400 U Bend | Monel 400 180 Deg bend | Monel 400 Short Stub end |
UNS N04400 Stub End | Monel 400 End Cap | Monel 400 Dish Cap |
Unimix Metal Corporate, under the leadership and mentoring of intellectual individuals, is currently one of the Manufacturer, Supplier, Stockiest, Importer and Exporter of Stainless Steel , Carbon Steel , Alloy Steel , High Nickel Alloys , Special Alloys , Aluminium Alloys , Copper Nickel , Titanium Alloys , Duplex & Super Duplex , Tantalum , Abrasion Resistant Steel, Hadfield Manganese Steel , Corten Steel , High Tensile , Quenched & Tempered Steel , Armour Steel , etc in Forms of Pipes , Tubes , Plates , Round Bars and Fittings.
Home
About
Products
Stainless Steel
Carbon Steel
Duplex Steel
Super Duplex Steel
Nickel Alloys Steel
Terms of Service
Privacy Policy
Disclosures
17, Ramkutir Building, 12th Khetwadi Cross Lane, Mumbai 400 004.
bhavik@unimixmetal.com | info@unimixmetal.com
+91-9321604957/+91-9920477004
+91-22-67438772 | +91-22-67438452
+91-22-23801838
www.unimixmetal.com
© 2022 UNIMIX METAL CORPORATION
