MONEL ASTM B366 UNS N05500 FITTING CROSS, MONEL UNS N05500 SHORT RADIUS ELBOW, MONEL ALLOY DIN 2.4375 HEX PLUS IN TURKEY, MONEL ALLOY K500 ECCENTRIC REDUCER IN AUSTRALIA, MONEL ASTM B366 UNS N05500 PIPE BEND PIPE U IN USA, MONEL K500 THREADED BEND IN GERMANY
Online Metals India reputed & leading organization engaged in Manufacturing & Exporting high-quality Monel K500 | WNR. 2.4375 | UNS N05500 Buttweld Pipe Fittings which are tested in severe conditions to obtain a product that has high durability, tensile strength.
Alloy K-500 180 Deg Bend Pipe Fittings has approximately three times the yield strength and double the tensile strength when compared with alloy 400. These Monel K500 Buttweld Fittings having a tensile strength of 140,000 psi.
Our produce Monel K500 Concentric Reducer Pipe Fittings is constructed for Pulp mill bleach systems, Tall oil distillation columns and equipment, Seawater handling equipment, and so on. ANSI B 16.28 Monel K500 End Pipe Cap Fittings are used to shut down the end of the pipe.
Like most other nickel alloys, Monel K500 Long Stub End Pipe Fittings is typically tough to machine and will work hard. Our Monel K500 Welded Pipe Fittings are used in oil and gas production units to join multiple pipes, besides offering excellent mechanical features at below zero temperatures.
Grade | Monel K500 / UNS N05500 |
Standard | ASTM B366, ASME SB366 |
Dimensions | ASME B16.28, ASME/ANSI B16.9, MSS-SP-43 |
Monel K500 Seamless Fittings | 1/2″ NB – 10″ NB |
Monel K500 Welded Fittings | 1/2″ NB – 48″ NB |
Form | 90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap |
Schedule | SCH 5 To SCH XXS |
Wall Thickness | from 2 to 40 mm |
Type | Seamless / Welded / Fabricated |
Standard | Monel K500 |
Werkstoff Nr. | 2.4375 |
UNS | N05500 |
JIS | NW 5500 |
AFNOR | – |
BS | – |
GOST | – |
EN | – |
Monel K500 | Ni | C | Al | Mn | Si | Fe | Cu | S | Ti | Cr |
63.0 min | 0.25 max | 2.3 – 3.15 | 1.5 max | 0.5 max | 05 – 2 | 27.0 – 33.0 | 0.010 max | 0.35 – 0.85 | – |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 1,60,000 , MPa – 1100 | 20 % |
Monel K500 Pipe Fitting | Monel K500 Butt weld Fitting | Monel K500 Seamless Fitting |
UNS N05500 Welded Fitting | Monel K500 90 Elbow | Monel K500 45 Elbow |
WNR. 2.4375 Long Radius Elbow | Monel K500 Short Radius Elbow | UNS N05500 Concentric Reducer |
Monel K500 Eccentric Reducer | Monel K500 Equal Tee | Monel K500 Unequal Tee |
Monel K500 Lateral Tee | UNS N05500 Fitting Cross | Monel K500 Pipe Bends |
Monel K500 U Bend | Monel K500 180 Deg bend | Monel K500 Short Stub end |
UNS N05500 Stub End | Monel K500 End Cap | Monel K500 Dish Cap |
Unimix Metal Corporate, under the leadership and mentoring of intellectual individuals, is currently one of the Manufacturer, Supplier, Stockiest, Importer and Exporter of Stainless Steel , Carbon Steel , Alloy Steel , High Nickel Alloys , Special Alloys , Aluminium Alloys , Copper Nickel , Titanium Alloys , Duplex & Super Duplex , Tantalum , Abrasion Resistant Steel, Hadfield Manganese Steel , Corten Steel , High Tensile , Quenched & Tempered Steel , Armour Steel , etc in Forms of Pipes , Tubes , Plates , Round Bars and Fittings.
17, Ramkutir Building, 12th Khetwadi Cross Lane, Mumbai 400 004.
bhavik@unimixmetal.com | info@unimixmetal.com
+91-9321604957/+91-9920477004
+91-22-67438772 | +91-22-67438452
+91-22-23801838
www.unimixmetal.com
© 2022 UNIMIX METAL CORPORATION
